Configured with an 8-inch C-CAM RST bass driver and a pivoting IDC module, housing a 4-inch C-CAM RST inverted midrange driver and a 1-inch C-CAM gold dome tweeter. 3-way design provides deeper bass, higher system output and greater power handling than the 200 Series 3-way models.

  • Unique IDC dual concentric mid-range/ HF module offering up to 18 degrees of pivot in all directions. Easily directed during post install set-up.
  • C-CAM drivers throughout, providing coherent tonal balance and sonic signature across the entire audio frequency spectrum.
  • Special Inverted C-CAM RST profile mid-range cone provides improved dispersion pattern.
  • True 3-way designs.
  • High overall efficiency.
  • High frequency level adjustment (+/- 3dB).
  • Mid frequency level adjustment (+/- 3dB).
  • Boundary compensation control.
  • Audio match with CP range 200 & 300 models and Silver & Gold GX Series hi-fi speakers.
  • Our innovative Tri-Grip fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal, maximising bass response and mid-range clarity.
  • Magnetic and easily removable steel grille.
  • All models are paint-able to blend with the living environment. Additional scrim material is provided for trouble free painting.
  • All models feature dust protection covers that are designed to prevent the ingress of dirt or dust into the driver and crossover.
  • Specs

    Frequency Response
    45 Hz – 30 kHz
    Impedance (Nominal)
    6 Ohms
    Sensitivity (1W@1M)
    90 dB
    Maximum SPL
    111.6 dBA
    Power Handling (RMS)
    120 W
    Recommended Amp Requirements
    30 – 120 W
    Drivers Unit Complement
    8 C-CAM cone bass driver featuring RST , pivoting IDC module housing:4 C-CAM RST inverted mid range driver1 C-CAM gold dome tweeter
    Adjustment Controls
    HF Level Switch (+3dB / 0dB / -3dB)MF Level Switch ( +3dB / 0dB / -3dB )Boundary Compensation Switch
    Overall Dimensions:(including grille) (H x W)
    441 mm x 288 mm(17 3/8 inch x 11 5/16 inch)
    Overall Depth:(including grille)
    101.5 mm(4 inch)
    Cut Out Dimensions: (H x W)
    387 mm x 234 mm(15 1/4 inch x 9 3/16 inch)
    Mounting Depth
    97.5 mm(3 13/16 inch)
    Fixing Type
    6 position Tri-Grip dog leg fixings
    Construction Material
    Mineral Filled ABS Plastic
    Pre-Construction Bracket
    WB8 (Green)
    Weight
    4.1kg (9lb)

    Reviews

    There are no reviews yet.

    Be the first to review “Monitor Audio WT380-IDC Trimless 300 8″ Pivoting In-Wall Speaker (Each)”

    Your email address will not be published. Required fields are marked *