Features an 8-inch C-CAM bass driver and a pivoting IDC module, housing a 4-inch C-CAM RST inverted midrange driver and a 1-inch C-CAM gold dome tweeter. True 3-way design provides rich midrange detail, higher system output, greater power handling, and superior vocal intelligibility and sound localisation. Optimum imaging and set-up are established via the pivoting IDC, high frequency (+3dB /0dB / -3dB) level adjustment, and boundary compensation (on / off) controls.

  • Unique IDC dual concentric mid-range/ HF module offering up to 18 degrees of pivot in all directions. Easily directed during post install set-up.
  • C-CAM drivers throughout, providing coherent tonal balance and sonic signature across the entire audio frequency spectrum.
  • Special Inverted C-CAM RST profile mid-range cone provides improved dispersion pattern.
  • True 3-way designs.
  • High overall efficiency.
  • High frequency level adjustment (+/- 3dB).
  • Boundary compensation control.
  • Audio match with CP range 200 models and Silver Series hi-fi speakers.
  • Our innovative Tri-Grip fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal, maximising bass response and mid-range clarity.
  • Magnetic and easily removable steel grille.
  • All models are paint-able to blend with the living environment. Additional scrim material is provided for trouble free painting.
  • All models are splash and humidity proof for installation in shower rooms or pool areas.
  • All models feature dust protection covers that are designed to prevent the ingress of dirt or dust into the driver and crossover.
  • Specs

    Frequency Response
    50 Hz – 30 kHz
    Impedance (Nominal)
    6 Ohms
    Sensitivity (1W@1M)
    90 dB
    Maximum SPL
    111.6 dBA
    Power Handling (RMS)
    120 W
    Recommended Amp Requirements
    30 – 120 W
    Drivers Unit Complement
    8 C-CAM cone bass driver, pivoting IDC module housing:4 C-CAM RST inverted mid range driver1 C-CAM gold dome tweeter
    Adjustment Controls
    HF Level Switch (+3dB / 0dB / -3dB)Boundary Compensation Switch
    Overall Diameter:(including grille)
    285 mm(11 1/4 inch)
    Overall Depth:(including grille)
    160 mm(6 5/16 inch)
    Cut Out Diameter
    247 mm(9 3/4 inch)
    Mounting Depth
    156 mm(6 1/8 inch)
    Fixing Type
    3 position Tri-Grip dog leg fixings
    Construction Material
    Mineral Filled ABS Plastic
    Pre-Construction Bracket
    CB8 (Green)
    Weight
    3.42kg (7lb 8oz)

    Reviews

    There are no reviews yet.

    Be the first to review “Monitor Audio CT280-IDC Trimless 200 8″ Pivoting In-Ceiling Speaker (Each)”

    Your email address will not be published. Required fields are marked *